Pedestrian Push-Button Stations

Download Data Sheet

General Description
Our push-button stations are designed for use at a pedestrian crosswalk to activate In-Roadway Warning Lights or Flashing LED Edge Lit Signs. All stations include an instructional sign plate and an ADA-compliant push-button.

BullDog III Push-Button Station
The BullDog III sets a higher standard for ADA-compliant pedestrian crossing push-buttons. The BullDog III is not only accessible, but it's also designed for very low maintenance and built on tested and proven technology. This button is highly vandal resistant with essentially no moving parts. It is pressure activated, but can withstand an impact from a baseball bat or hammer. When the switch activates, you will hear a beep and the LED will flash. The BullDog III Push-Button Station includes an instructional sign, a push-button for activating the flashing lights, and a push-button frame.

BullDog III Features
• BullDog III Push-Button Station includes: an instructional sign, a push-button, and push-button frame.
• Superior die-cast aluminum, powder-coated body - independently lab tested to NEMA 250 (6P) specifications.
• 316 Marine grade stainless steel button cap far exceeds the durability of competing products.
• 2" ADA compliant button withstands severe impact from baseball bats, skate boards, hockey sticks, etc.
• Button places a call with less than two pounds of force.
• Button requires push action to activate - cannot be jammed or stuck on.
• Wide operating temperature range of -30° to 165°F (-34° to 74°C).
• Ultra-durable, long-life - tested to 300 million operations.
• Wind, rain, hail, and vibration have no negative effects.
• Transient protection meets and exceeds NEMA specifications - independently lab tested and certified.
• Piezo-driven solid state switch sounds simultaneously with push-button.
• Provides two-tone audible confirmation as well as visual LED confirmation.
• Available in black or yellow (contact TSC for other colors).
• BullDog III push-buttons use power from existing switch wires.
• 5-year warranty.

BullDog III Push-Button Station
BullDog III Push-Button Station:
Left Arrow Button (left)
Stainless Steel Button (right)

BullDog III Push-Button
BullDog III Push-Button

XAV2E-LED Push-Button Station
The XAV2E-LED connects to a control unit to enable the triggering of crosswalk lights and can provide a locating tone and a voice message. XAV2E-LED Push-Button Station includes an instructional sign, a push-button housing, a push-button with directional arrow, and a group of three yellow LEDs which flash in sync with the crosswalk lighting.

XAV2E-LED Features
• XAV2E-LED Push-Button Station includes: an instructional sign, a push-button housing, and a rugged, highly-reliable push-button with raised directional arrow.
• Station can provide a locating tone (optional) and pre-recorded voice message.
• Features selectable languages, plus repeatable messages - once, twice, three times, or continuous while warning system is activated.
• Automatic volume adjustment to ambient sound level via noise monitoring microphone, 10 watt RMS audio amplifier, and built-in speaker.
• In-unit LEDs are synchronized to crosswalk sign, in-pavement, or overhead lights.
• Supplied with an 8 conductor terminal block ready for connection directly to an XAVCU2 mounted on the same pole.
• ADA compliant push-button with directional arrow - field adjustable direction: left, right, up or down.
• The unit is supplied with mounting hardware and installation instructions.

XAV2E-LED Push-Button Station
XAV2E-LED Push-Button Station

Ordering Codes

Home  |  Products  |  Packages  |  Design  |  Blog  |  Company  |  Contact

Copyright © 2017 Traffic Safety Corp. All rights reserved.