The TS40 conforms to the specifications of the Federal Highway Administration (FHWA) set forth in the Manual on Uniform Traffic Control Devices (MUTCD). Using the latest advances in LED technology, the TS40 employs a set of synchronized high-intensity LEDs to extend the range of visibility of the sign during the day, night and under the worst weather conditions. Furthermore, the LEDs are flashed, which increases driver awareness of the sign.
Why Our Signs are Better
High Visibility
Type IX reflective sheeting provides outstanding reflective brightness, day or night.
High intensity LEDs extend the visibility of the sign under all weather conditions.
Superior Performance
Low power LED technology reduces system power consumption and operating cost.
Outstanding Durability
Highway grade .080 aluminum construction provides resistance to corrosion.
The use of highway grade Type IX sheeting helps to maintain long term reflectivity.
Stainless steel security fasteners and Tufnut anti-theft mounting hardware included to keep the sign secure.
Signs are weatherproof to prevent outside elements from entering the internal casing.
Features
MUTCD section 2A.07 and 2A.08 compliant.
Made in the USA with the longest warranty in the industry.
Improves driver compliance both day and night.
High visibility, low power consumption.
Fast, easy installation, low maintenance.
Field adjustable LED flashing duration (30 seconds standard).
Vandal-resistant mounting hardware included.
Multiple power options available: Power Grid (AC), Solar (DC), or Battery (DC).
Solar TS40
A solar powered TS40 is available that features off-grid power generation and independent flashing control.
Features
Solar powered with battery backup, no AC power required.
Autonomy after full charge, up to 12 days flashing 24/7.
MUTCD section 2A.07 and 2A.08 compliant.
Installs easily onto any new or existing sign post.
At night, automatic LED dimming reduces glare for motorists and extends battery life
High intensity LEDs flash in unison, once per second, commanding the attention of drivers day and night.
Activation options: Continuous 24/7 Flashing, Programmable Timer, or Wireless Push-button.
Optional Push-Button Activation
Provides a simple and convenient way for pedestrians to activate the signs. Wireless or wired push-button activation is available.
Optional Keyfob Remote Control Transmitter
A keyfob remote can be added to the TS40 to allow for wireless activation and deactivation of the sign. This is ideal for applications where temporary sign activation is required. For example, crossing guards would have the ability to turn on the flashing lights when children enter the crosswalk and then stop the lights when the children clear the crosswalk. The keyfob would also allow firefighters to activate “fire station ahead” signs when exiting their station and merging with traffic. After the keyfob is used to activate the lights, the lights will flash for 90 seconds, or until deactivated with the keyfob. The keyfob has a range of 1/2 mile+.
Optional Door Switch Activation
Activates signs when a door is opened.
Optional Photo-Sensor Bollard Activation
Activates signs when pedestrian passes between two bollards.
Optional Double Sided Configuration
Our double sided configuration is available with an attached 2-1/4″ Telespar square tube sleeve. The Telespar sign support system allows for fast and easy installation. Just insert the sign’s 2-1/4″ square tube sleeve over a 2″ Telespar pole, insert the bolts and tighten.
Videos
Specifications
TS40 Left Turn Flashing LED Edge Lit Sign
Our TS40 Flashing Left Turn Sign (W1-1L) conforms to the specifications of the Federal Highway Administration (FHWA) set forth in the Manual on Uniform Traffic Control Devices (MUTCD). Using the latest advances in LED technology, the TS40 employs a set of synchronized high-intensity LEDs to extend the range of visibility of the sign during the day or night. Furthermore, the LEDs are flashed, which increases driver awareness of the sign.
Four 1-¼” white or yellow LED lights on 24″ signs.
Eight 1-¼” white or yellow LED lights on 30″ or larger signs.
24/7 flashing, high intensity LEDs extend the visibility of the sign under all weather conditions.
Type IX reflective sheeting provides outstanding reflective brightness, day or night.
Highway grade .080 aluminum construction provides resistance to corrosion.
Stainless steel security fasteners and Tufnut vandal-resistant mounting hardware included to keep the sign secure.
Signs are weatherproof to prevent outside elements from entering the internal casing.
Made in the USA.
MUTCD section 2A.07 compliant.
MUTCD W1-1L.
Our signs feature 24/7 flashing. If an activation method is required, it must be specified when the sign is purchased. Please contact Traffic Safety Corp. for additional information on activation methods.
TS40 Specifications*:
Compliance
MUTCD section 2A.07 and 2A.08 compliant
Construction
.080 highway grade aluminum and stainless fasteners
Tufnut security mounting hardware (pole not included)
LED Lighting
White or Yellow sign background: White LEDs standard, Yellow LEDs optional
Red sign background: Red LEDs standard, White LEDs optional
One-watt LED 1-1/4″ bullet style in sign perimeter border
Flash rate 50 to 60 times per minute
Field adjustable LED flashing duration (30 seconds standard)
LED life expectancy over 100,000 hours
Visible up to 2 miles away
Field replaceable grommet mounted lights
Sealed DOT approved lighting
Circuitry Technology
Sealed PCB technology
24 hour operation / dusk to dawn operation
Solar / AC / Battery Specifications**
15W solar cell
AC – 120-240VAC or 277VAC
DC – 6 volt 18AH SLA battery pack: 3 to 5 year battery life; autonomy after full charge, up to 12 days flashing 24/7
Options
Additional LED lights
Standard 7 day or deluxe 365 day programmable timers
Wireless activation, keyfob remote control transmitter, photo-sensor bollard, door switch.
Wired or wireless push-button activation
Keyed on/off switch
Anti-graffiti protective overlay
Warranty
10 Year Solar Panel
5 Year Sign Construction
2 Year LED Lights & Circuitry
1 Year Battery (warranty only covers batteries supplied by Traffic Safety Corp.)
Reflective Sheeting
Type IX Fluorescent Yellow Green (FYG) (Standard for warning signs in school zone areas)
Type IX (Yellow, Red, White) (Standard for non-school zone areas)
* All specifications subject to change without notice.
** Special configuration (wireless, etc.) signs will have 12 volt 22AH SLA battery with 20W solar cell (22.75″ x 16.75″ x 1.125″, 4.5″ depth with bracket).
Sign reflective sheeting in compliance with current MUTCD requirements for reflectivity, wording, materials and mounting guidelines.
Pole mounting requirements per MUTCD guidelines.
Sign constructed of .080 aluminum with stainless / aluminum fasteners and weatherproof sealant.
All mounting hardware fasteners shall be theft deterrent hardware preferably Tufnut security hardware where applicable.
3/8″ x 3″ stainless steel tap bolts for standard mounting hardware (other mounting options available).
Battery access compartment located at lower portion of sign to allow access to battery compartment for maintenance (field replaceable battery).
Solar signs to have a 2″ to 4″ wide casing, depending on model, between front and rear sign faces to enclose all wiring, battery, PCB and LED light connections. AC powered signs 2″ wide casing.
Security keyed ON/OFF switch located on side of casing controlling operation.
Vented weatherproof casing allowing ambient air to circulate for internal components and prevent condensation and excessive heat buildup.
Compression type solar panel connector allowing optimum directional placement of solar collector.
Anti-theft placards and decals for theft / vandalism deterrents.
Serial # plate with manufacture date for informational and warranty purposes.
2. Power Consumption
12 Volt
6 Volt
Full Brightness (daytime)
.095 Amps, 1.14 Watts
.041 Amps, .246 Watts
Dimmed (nighttime)
.043 Amps, .516 Watts
.035 Amps, .21 Watts
3. Battery
12 Volt
12 Volt 22000mAH
SLA
6 Volt
2 – 6 Volt 9000mAh
SLA (18 Ah Total)
Dimensions
7.14" x 3.03" x 6.59"
5.95" x 1.34" x 3.70"
Weight
12.74 lb.
3.09 lb.
Terminal Connector
Nut/Bolt
T2 – Spade
Operating Temperature
-40°F to +156°F
-40°F to +156°F
Warranty
1 Year
1 Year
Battery mounting with aluminum fasteners and brackets for in-field replacement after life cycle has expired.
Battery casing fully sealed in a moisture and corrosion proof casing.
Required battery replacement every 18 months from manufacture date.
Warranty only covers batteries supplied by Traffic Safety Corp.
Any damage to the sign caused by unauthorized third-party batteries will void all sign warranties.
4. Solar Panel Collector
15 Watt
20 Watt
30 Watt
Max Power
15W
20W
30W
Operating Voltage
8.0V
17.2V
17.4V
Operating Current
1.88A
1.16A
1.73A
Max Voltage
10.8V
21.6V
21.6V
Operating Temperature
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
Dimensions
16.75" x 14.00" x 1.125"
22.75" x 16.75" x 1.125"
26.5" x 16.75" x 1.125"
Type
Polycrystalline
Polycrystalline
Polycrystalline
Solar panels to be 6/12 volt 15/20/30 watt collector type depending on type of sign, region, LED light quantities and application uses.
Solar panel bracket constructed of aluminum alloy.
Schedule 40 3/4″ aluminum tubing attached to the solar panel bracket to the upper casing of the sign casing. Panel must face south.
Angle of panel shall be 45° to 65° depending on region. Special attention required to insure solar collector has good access to solar power with no obstructions for optimum operation.
Electrical connectors shall be insulated spade type connectors.
Tempered glass solar cell sealer/protector.
5. LED Lights (Light Emitting Diodes)
Sign shall have a series of either 4 – 8 LEDs depending on sign size and configuration.
All LEDs shall be compliant to MUTCD Section 2A.07 and match colors acceptable to each type of signal per this specification.
LED flash rate at 50 to 60 times per minute per MUTCD Section 2A.07 requirements.
LED light dimensions: 1/8″ Cree LED inside a 1-1/4″ diameter lens.
100,000 hour rated LED life (11.415 years).
High impact acrylic water/vibration proof housing lens.
Completely resin sealed lens.
Operating voltage: 6/12 VDC / Amp Draw 85ma.
Rubber grommet mounted (for easy in-field replacement) into a 1-1/4″ hole.
Output power of LEDs approximate 60,000 mcd brightness.
LEDs wired in series for simultaneous flash pattern per MUTCD.
Wiring completely enclosed in sign casing with access for replacement.
6. Circuitry / LED Lighting Control Unit
Circuit shall have a minimum of 4 output LED light circuits for use.
Circuit shall control flash rates at 50 to 60 times per minute.
Circuit shall flash 500 milliseconds / 150 milliseconds per flash.
Activation duration shall be field adjustable in one-second increments, over a range of 1 to 99 seconds (30 seconds standard).
Available dusk-to-dawn flash mode.
Micro-controller technology.
Keyed “ON/OFF” activation for tamper/vandalism protection.
Operation of circuit temperatures -40°C to +80°C.
Circuit enclosed in weatherproof casing.
Low voltage protection program (protecting from total discharge of battery).
All wiring connections in accordance to standard wiring protection guidelines.
7. Warranty
10 Year Solar Panel
5 Year Sign Construction
2 Year LED Lights & Circuitry
1 Year Battery (warranty only covers batteries supplied by Traffic Safety Corp.)
Ordering Codes
Ordering Codes
SI-TS40W11L24: 24″ Left Turn Arrow Sign (W1-1L) SI-TS40W11L30: 30″ Left Turn Arrow Sign (W1-1L) SI-TS40W11L36: 36″ Left Turn Arrow Sign (W1-1L) SI-TS40W11L48: 48″ Left Turn Arrow Sign (W1-1L)
Sign Faces
Power[3]
Activation Options (select only one)
Reflective Sheeting
D: Double Sided[2,7]
AC: 120-240VAC
ACH: 277VAC
B: Battery[4]
S: Solar
1: Wireless Communication Sign for Wired Activation (push-button not included) 2: Standard Programmable 7 Day Timer 3: Photocell 4: Keyfob Remote Control Transmitter 5: Single Sign for Wired Activation (push-button not included) 6: Deluxe Programmable 365 Day Timer 7: Single Sign for Wireless Activation (push-button not included) 9: Wireless Communication Sign for Wireless Activation (push-button not included) 10: Wireless Communication Sign for Wired Push-button with Audio Caution Message Capability (push-button not included) 11: Photo-Sensor Bollards 12: Door Switch
A: Type IX Fluorescent Yellow Green (FYG)[5]
B: Type IX
1: Anti-graffiti Protective Overlay
1. SI-TS40 is used in standalone applications, without a system controller.
2. Single sided signs standard. Not available with combo signs.
3. 24/7 operation standard.
4. Includes spare battery and charger.
5. Fluorescent Yellow Green (FYG) sheeting should be used in school zone areas.
6. When ordering, specify size & shape (square, round) of your sign pole. Pole not included, sold separately.
7. Sign LED Quantity: 24″ signs have 4 LEDs; 30″ or larger signs have 8 LEDs; all double sided signs have 4 LEDs per side; all solar combo signs have 4 LEDs on each sign (specify additional LEDs when ordering).
8. Please specify custom lettering and graphics when ordering.
Improve emergency crew response time by giving advanced warning to drivers that emerg Read More
Get the longest warranty in the industry
We offer a 5-Year Warranty – the longest in the industry – on inpavement crosswalk warning systems. For over 20 years, we’ve been building high quality, certified traffic products.